For those of you who don't know, the Morton M5, five-cylinder radial build article will be in the June issue of Model Engine Builder. This is the 'new' Morton...
Mike, What is going on with the magazine? I have not received the first issue. Thanks, Jay ... From: mrehmus To: bayareaenginemodelersclub@yahoogroups.com ...
Cory, I'll try to send you the 411 on it tomorrow,we are having severe thunder storms now and it's 11:20 Rick ... From: corey renner <vandal968@...> To:...
Cory, This is exactly what I have I would like to have $750.00 and I'll pay shipping and ins. It sat more than was used my dad bought it new for gunsmithing...
Issue #2 of Model Engine Builder magazine is in the mail. As before, expect the P.O. to take up to 30 days to deliver it to you. Most hit between the 2nd and...
Hello All, Yesterday, Saturday 07-09-2005, I spoke with Margaret Shores. Our conversation revolved around the Golden Eagle, and if there would be another...
Dirk, Received the castings for the V-4. They look great. I haven't had time to do much more than open the box as we've just come back from a 3-day stint...
Received my issue 7/12/2005 Mike ... and a great issue it is! ... From: mrehmus To: bayareaenginemodelersclub@yahoogroups.com Sent: Friday, July 01, 2005 7:37...
I'm Jim Stewart. I attended the 7/16 meeting with Mike Rehmus as a guest. I had a good time and enjoyed the presentations and demos. I took some pictures of...
Welcome, Jim. Mike ... From: <bayareaenginemodelersclub@yahoogroups.com> To: <bayareaenginemodelersclub@yahoogroups.com> Sent: Saturday, July 23, 2005 6:51 AM ...
I've been lurking here for quite a while and I finally have a question that perhaps someone here could answer. I've decided on building a Whittle V8 and am...
Jim: I'm just guessing, but some alloys are easier to obtain in rounds than squares. Also, maybe that's what he had available. That's usually the reason I work...
Jim, as far as I can guess, the only reason would be that round bar is more readily available in the different alloy grades, if you have square by all means...
This is the Modern Machine Shop site. They have a number of articles that are only on-line. Some are interestings, some probably don't apply to those of us...
Guys: I posted photos of my nearly completed panhead on another group and thought I might post them here as well since I have had a lot of support from you...
Very nice work, Ron. What's the story behind this build? Starting on a Whittle V8 myself, looks like quite a challenge. I'll end up using my old Unimat SL...
I couldn't see them until I started at the first page and clicked "Show All." ... From: Clint D To: bayareaenginemodelersclub@yahoogroups.com Sent: Tuesday,...
