Hi Tom and folks, I recently made an inquiry to a guy in Sweden about information for an engine (not a Merlin). He responded with the information I needed,...
Bill I would very much like any information you can get on the 1/5 scale merlin. Larry _________________________________________________________________ MSN...
Hi Bill I would be very interested to see what he has. My Merlin will be 1/4 scale, not 1/5th, but this would still be very interesting to see. When I have...
I'm setting here looking at a 12 cylinder 90*-Vee two-stroke engine. In the middle of the 12 cylinders there are 6 little pistons called sleeve valve drive...
Here is a site that may explain your question. You need Adobe reader to access the site. http://www.marss.com/media/sleeve.pdf On one page they show an engine...
Hello folks, I mentioned in a previous post that I wrote to a guy in Sweden for information on an engine. I received the information I wanted along with a...
Im looking for some help. I would like to build a small digital tach to use on my engine's. Could someone tell me what parts i will need and print on how to...
Hi Dave: Dave Bowes (dbowes12@...) of Ontario, Canada is a member of the Toronto Society of Model Engineers (TSME). He sells a kit including all parts...
Got the pattern board made for the OHV heads & valve covers & blower ,the 1/4 scale 6-71 roots blower(13 Casting).the castings are for a challenger block it...
Ron thanks for the info. I will e-mail him for some information. I love this site all's you have to do is ask a question and someone is very willing to answer...
I'm building my first internal combusion engine and I need some help understanding how to lap a piston in its cylinder. Its failrly obvious how to lap...
-Hello, I read your question about bevel gears to drive the cam drive shafts that extend upwards from the transfer case to the bottom of the cylinder heads on...
Robert You dont use the piston in the cylinder when laping! You make the piston a few thou. biger than the finished bore size , and bore the cylinder a few...
Hello Michael Don't throw anything in the garbage just yet!!! These shafts are not 90 degrees apart, that's the good news. Hopefully this next info won't be...
I'm building my first IC engine (Hamilton Upshur's Farm Engine, published in Strictly IC magazine) and it calls for 2 springs to be made for the intake and...
Does any one have a good color picture or pictures of L. C. Mason's Mastiff engine? I would like to see some good pictures of this engine since I am ...
any one thinking about solid state ignition systems check out this site they work on models or other kind of engines saw one demonstrated at engine show worked...
Hello group. Anyone here built the little 50cc flathead 4 that Coles' sells? (CAT# C-601) It sure resembles the "Wall 4" that I see in the photo archives. It...
Go to this site, join it, and then look at many pictures and info on the engine. http://groups.yahoo.com/group/mlprojects/ I just joined it and saw info on the...
... thanks ... Hi Tom. Call Coles' Power Models Inc in Hollywood, CA. Their number is (818) 762-0272. Hours are from 9:00AM-12:00noon Pacific time. Catalog is...
Hello group. I recently ordered a Wall 4 casting and drawing set. Does this come with any machining instructions, or are there any magazine articles floating...
