Try Steiner Tractor, I think they are online. They have a whole host of replacement tin and engine parts for good prices. You just have to accept the they...
Hi, just got a TO-20 ,drained trans & rear.Had some water in it. Dip stick has no mark on it. App. how much fluid do I put back in. Then I can mark stick....
From completely empty it will need 5 galls exactly (24 US quarts) it will take a little while to level out due to a baffle on the rear of the gearbox. If you...
... From: Glenda Hill To: fergusontractorclub@yahoogroups.com Sent: Tuesday, April 05, 2005 9:52 AM Subject: rear end axle right hand Looking for second hand...
Glenda Hill
glenlili@...
Apr 6, 2005 8:01 am
7066
I measured my dipstick, and from the top of the stick [where it would rest on the lip of the tube] to the full mark is 3.66 inches. or, about 87mm. The add...
... From: "Glenda Hill" <glenlili@...> To: <fergusontractorclub@yahoogroups.com> Sent: Wednesday, April 06, 2005 4:27 PM Subject: [Ferguson tractor...
Glenda Hill
glenlili@...
Apr 7, 2005 2:41 am
7068
I am wondering how to pick the differance between an FE35 and an MF35 both are petrol? Tractor has had a paint job,so colour is not necessarly correct.To make...
Apart from the paint there is no difference between an FE35 and an MF35 all Massey tractors changed the colour scheme in 1957 at serial number 74656.(produced...
They changed the rear axle at 325,001 to a heavier duty specification, they will not interchange. You will have to check the number of stud holes around the...
Subject: rear end axle right hand ... from back end) and necessary gear to go with axle. On gearbox housing to identify tractor more it has the number 5 with...
Thanks for that very useful bit of information,I will check the tractors as soon as possible. just_john10 <granada1@...> wrote: Apart from the paint...
I am after the part numbers for the Dizzy Cap, leads, rotor button, points and spark plugs to suit my grey fergie. S/N TED252940 also if anyone can tell me the...
Hi members, I have a 1957 FE35 TVO engined tractor in my collection. The engine is fine except for a rattle at high revs when hot. Last summer I changed the...
Hi, The small end bushes are the same on the 80mm/85mm & 87mm engines,spares are generally available for this engine from a number of suppliers.MF part number...
Points are Lucas 407050 or MF 829925M1 or Sparex S42372 Distributor cap is MF 829937M1 or Sparex S41169 Rotor arm is Lucas 408355 or MF 829927M1 or Sparex...
Thanks John, I had not thought about the camshaft being the source of the noise, but you may be right as I know that Fergy little ends do tend to rattle at...
Hi Richard, Yes it would be perfectly ok to ignore it, it makes a noise but that is all. To rectify it, you need to remove the camshaft and fit bushes into the...
In a message dated 4/11/2005 10:43:11 A.M. Eastern Standard Time, granada1@... writes: Hi, The small end bushes are the same on the 80mm/85mm & 87mm ...
Hi John, Thanks for the advice. I will leave well alone as the engine is in first class order otherwise, uses no oil, has ok pressure and the oil stays clean...
Hi Richard, I think that is a very wise move on your part, why make work for yourself, I am sure you can find plenty of other things to do and as it isn't...
I was told that I could change the cylinder from a Ford 8n hydraulic system to my Ferguson T0 30 and have power on the 3 point hitch both up and down. Does...
The hydraulic system on an 8N is the same as the a TO30 it is a FERGUSON system after all. if you need a double acting ram to power down you would need to...
In a message dated 4/12/2005 11:46:31 A.M. Eastern Standard Time, leekal@... writes: I was told that I could change the cylinder from a Ford 8n hydraulic ...
Hi All, Some time ago I posted a query about the availability of front bumper bars / weight bracket for an MF35. For anyone interested I have found that it can...
I spent many year working on both Fords and Fergusons, The answer to your question is NO. I like the other person who responded wonder why you would want power...
