Hi Danny If I recall, you are a fellow Aussie, yes? If that's the case, find your local bare-co agent and make friends. They have new replacement grill and...
Hi Danny, Not heard from you for a couple of months now, wondering what had happened to you. You can only get the grilles and the Tee piece for the Hoods at...
On the topic of bonnets, mines aluminium, many others have aluminium, or is mine a special lightweight racing version. Bob Another Aussie. ... etc etc etc ... ...
There were some hoods made of aluminium around the early fifties I think but mainly the hoods were pressed steel. Some diesels had the aluminium hoods and they...
Hi All, Does anyone out there in Australia have an original towing device that bolts underneath diff,(like towbar) to suit my TE20. P.S. dont want draw bar...
Glenda Hill
glenlili@...
Aug 19, 2005 11:49 am
7204
my linkage arms keep sinking when i lift the implement up . could someone please help me solve this problem. Send instant messages to your online friends...
my linkage arms keep sinking when i lift the implement up. could someone please help me solve this problem. also someone told me about fergies that had a V 8...
hi group once again im seeking been there done that advice im getting and oil gas mix from what seems the tube that feeds the oil pressure gauge just in front...
A few items come to mind re the sinking arms-1'st make sure the nuts under the seat are tight to prevent a gasket seep/leak/failure which would cause the arms...
You don't say what model of tractor you have. Is it a TE20 type or a 35 type tractor as the problems will be different. Do you mean the linkage drops when you...
Hi Gang done a bit of a revamp on my TEA20. Just doing the final tune up. Can anyone help. Carburetor adjustments for Zenith 28G Points Gap or dwell angle How...
I feel so stupid.....the comments were made in reference to a TO-20. Others models may or may not be the same. [In the corner with my dunce hat on....] Greg...
OK...Let's get this right-we need more information, ie What model tractor do you have, pto engaged/spinning?, foot on the clutch?, adequate fluid level? ...
I had a quick look around regarding that Funk conversion but I didnt see any mention of one, it is still possible though that it has been done....John ... a ...
hello everyone i have just obtained a mf35 with diesel motor ser.#is sdm 195895 not sure what year model it is but going to get it running soon i hope.it was...
Records show that this number was an SNM not SDM. It was built on Thursday 23rd June 1960 on the night shift, it was part of a block of 51 built at that time....
i am prety sure it is a D and not a N it has a standard diesel motor in it thanks for all the help and look forward to chatting with ya'll soon marshall- -- In...
Well there is something wrong with the number then if it has a Standard Diesel in it as they didn't make them after serial 166595. That information I posted...
well i hope there is nothing wrong with number but i am going to post a pic of the ser.# plate in photos under Bobs toys named after my father, the only thing...
I am presently looking at a TE 20 fitted with a Ferguson front end loader which is banana shaped,never seen one before you see.The fuel tank on this tractor...
That isn't the original plate with the number on it, the factory plates were riveted to the dash, this one is screwed on. Someone has replaced the plate...
OK problem solved, now we have seen the pictures it is an MF35 and the number is correct for a 1959 model, the tractor was made in US not UK as we first...
The loader is a High Lift loader model M-UE-20 and there are other numbers too depending on what tractor it was designed for and what it was supplied with...
Just been checking the parts list looking for an answer to that query about the fuel tap with a lever and I have found that after tractor 294147 (1952) they...
I was going to replace the Lift Piston in my TO-30 with a NAA530B Piston for a 8N. Has anyone done this? I have a 52 8N and the piston that come out of it is...
The Ferguson Lift Cylinder is 2-1/2" dia and is fitted with steel rings, providing the type you fit is similar and is made for working at the same pressure and...
My TO 30 came to my possession with a rubber fuel line from the sediment bowl to the Carb with an in-line fuel filter. Am I correct in assuming that the...
