Further to my suggestion posted last year about the troubles caused by the condensor on a TEA20. When the lack of power returned I scatched my head and in a...
The fact that you have converted from 6v to 12 v does not make any difference to the condenser. If you were having problems after converting, it is more likely...
My new ignition kit said to set the points to 0.022 and provide a small gauge for this. Which is correct. The gap will affect the timing. Hal ... From:...
The contact gap on a 6volt TEA is .010" - .012" and on a 12volt system it is .014" - .016"....it is .022" on a TO20 and TO30 tractor and they were on 6 volts...
Joh Thas for the update on the point gap. Now I just need the right coil and resistor to go with it or else a 12 volt internal resistor coil. The coil thing is...
Can anyone tell me were to get replacement springs for the advance weights in the distributor. I've fashioned ones that seem to be working but I'd rather know...
I can't answer yor question,but i love your address! As you can see by my address, avidbow, i see we have more than ferguson tractors in common! Best of luck...
What about the tractor makes you think it's not original? The front loader was an option, and it appears to be an orginal. Do you have any other photos to show...
The tractor looks standard apart from the front wheels,the loader was just an add-on. There are plenty of spare parts available for these tractors now, so you...
You don't say what model tractor you have, or what engine so we can't tell you unless you tell us what it is as there were two different electrical systems...
Thank you for that, you may like to try the following people, they recondition Distributors among other things so possibly they will have the springs you...
We thought it was customized because it did not appear to be a manufacuted addition. The hydro hose goes across the dash board and the platform the compressor...
The Tractor apart from the front wheels looks standard, the loader would not be fitted at the factory so it may not look particularly tidy in the pipework...
... not ... I looked at that pic and yes the bumper is on upside down. That bumper is designed for a later model like a 35. if it were on correct the hood ...
It joggles the lever that you push so that the lift stays where you put it. The lift is tied to the hand lever so if the lift moves up or down, the hand lever...
I never thought about the hood interference. Interesting. Hal ... From: forrestcav To: fergusontractorclub@yahoogroups.com Sent: Friday, March 14, 2008 8:39...
i need a used oil pan for a ferguson te-20 or to 20 i think they both arethe same. the filter is in the pan i think. price please . i need the gasket too,...
i need a used oil pan for a ferguson te=20 or to 20, i think they are the same. the oil filter is in the oil pan too i also need the gasket. it has 18 bolts....
Thanks for the explanation Hal. I guess I must be a dumb ole' hick, because I can't seen to wrap my mind round this concept. Maybe I need skematics with step...
Ebay has lots of used Ferguson parts listed by many vendors. Many just tear tractors apart and sell the pieces. The make more that way than trying to get...
A rod is attached the right lift arm fromt he lift control lever. If the lift arm goes down, it pulls on the lift control lever to raise it until the lift and...
... just tear tractors apart and sell the pieces. The make more that way than trying to get $3000 for something that runs (not a show tractor). Just used...
Does anyone know if the fan shroud from a 9n Ford radiator will work on a TO20? Nothing I find gives any sizes but they look close to, if not, the same. Thanks...
I wish you spoke up sooner. I just put it up on ebay yesterday. It came off a TO30 but the parts manual said it will fit the TO20 too. Part #181 626 M1. If you...
