Here is some info on the pulls I hope this helps. GCPA Indoors NOVEMBER 17TH - DECEMBER - 8TH - JANUARY 19TH - FEBUARY 16TH Ohio Fair Grounds - Hartford, KY ...
I need at least one rear rim for a late 50s 530 I need only one and only the rim (wheel is good) but will take it how ever you want to sell it. Tire size is...
Currently I run an aluminum clutch disk with a cultivator spring and refaced stock pressure plates. It also has a stress proof steel driveshaft. The problem is...
Dennis, try installing a 5/8" i.d. split lockwasher between the pressure plates & a 3/8" long steel spacer to replace the teasing spring. Doing this should ...
Dennis, I would do a double stock disc setup before the aluminum. We have run just about every kind of clutch setup on the planet. The aluminum is probably the...
... the 6 puck, we still use the 6 puck on our 50 cubes in NQS.I have plenty of slip yet good hook up. I sometimes let it slip for 20 plus feet with no...
I think the aluminum clutch disc works best for a stock tractor. And the double OEM-fiber clutch disc setup works better for the higher horsepower tractors. Of...
Thanks guys. Found my rims already and right down the road [Photo Sharing and Video Hosting at Photobucket] <http://photobucket.com/> [Non-text portions of...
... is 6061. With the stock double disk setup will it slip like I want. I see vogel is making a stock disk out of his slpline drive material. If I need to I...
If you are putting out 40 or more HP and turning 6,000 or more RPMs then you really need a professional clutch anyway. Spending a little money on the clutch...
Greg is right. The aluminum clutch disc works best for low rpm stock engines. I use the aluminum clutch disc in my stock pulling tractors & double OEM-fiber...
We had been running a double disc cub setup seemed to work ok it would launch somewhat hard, we could easily carry the front end in the air for 20-30 feet. It...
I had a 6061 aluminum disc in a highly modified Command V-twin tractor turning 7500rpm and somewhere around 50-55hp. Billet pressure plates. Disc lasted...
WANTED WITH NO ENGINE!! must be near blue earth mn 56013 would trade a nice 140 jd h1 with a rebuilt 14 kohler and 48" deck, NICE TRACTOR CALL ME ANY TIME...
im confues are you looking for a tractor, like a cub cadet 582 or are you selling one. If you want one i have a 129 that has no hood or grill, thats supposed...
... made from the same material as the spline drive clutch plates. I called and inquired about them. I was told that you can slip them as much as you want. My...
I run Vogel's disc in my double disc set up. I have no problem slipping it off the line. I run this set up behind my 48 cube super stock. You will be happy...
Good choice. I sell the aluminum disc to pullers with low HP tractors and I tell them that they are not getting a REAL clutch disc.Some folks just can't bear ...
Ive posted every where I could think of in hopes of finding an answere. Tore into the Cheaterbeater tranny the other day looking for a vibration and found...
Looks like you should have been running a shifter lock and you need to reinforce your shift fork to keep it from flexing. ... answere. ... vibration ... one ...
Thanks Julian I didn't think about fork flex. I had always thought they would break. I'm pretty sure my forks were welded but don't remember for sure. I think...
I just called to order another set of VM07 tires from Vogel and they gave me free shipping! They said this special would run though the end of the year....
I looked today and I was correct. The forks were welded. Im thinking the heavy forks, A shift lock, and I will flip that bottom gear around so at least it will...
